DESIGN AND assembly of SPECIAL HEATER RODS WITH VARIOUS NON-UNIFORM POWER PROFILES AND DIFFERENT HEATER LENGTHS (FROM 1.5 TO 16 FT, TYPICAL 2FT, 7FT, 8FT, 12FT, AND 14FT) FOR EXTREMELY HIGH TEMPERATURE THERMAL-HYDRAULIC TESTING UNDER LOW TO EXTREMELY HIGH PRESSURE (UP TO 3190 PSI (220 BAR)) SUPERCRITICAL CONDITION.
DIRECT HEATING WITH VERY THIN HEATER WALL TO ALLOW ACCURATE HEAT FLUX MEASUREMENT WITHOUT THE IMPACT OF AXIAL HEAT CONDUCTION UNDER VARIOUS TRANSIENT EVENTS.
WITH PROPRIETARY TECHNOLOGY TO DESIGN AND assembly of SPECIAL ANTI-NECK DOWN HEATER RODS TO FACILITATE LOW PRESSURE, LOW FLOW-RATE FLOW INSTABILITY AND CHF TESTING.
DESIGN AND assembly of SPECIAL HEATER RODS TOGETHER WITH PROPRIETARY SUPPORTING STRUCTURES FOR BOWED RODS, BALLOONED RODS, AND OTHER ABNORMALITY SIMULATION HEATER RODS.
DESIGN AND assembly of HIGH QUALITY RELIABLE WIRE-WRAPPED (WIRE-SPACED) SIMULATION FUEL PINS WITH PROPER INSTRUMENTATION AND STRESS RELEASE TO ENSURE THE INTEGRITY, SHAPE, AND POSITIONS OF SPACER RIBS DURING RAPID HIGH TEMPERATURE TRANSIENT TESTING.
DESIGN AND assembly of SPECIAL HEATER RODS TO PROVIDE VARIOUS NON-INTRUSIVE INSTRUMENTATION, INCLUDING POWER, LOCAL HEAT FLUX, HEATER WALL TEMPERATURE, FLUID TEMPERATURE, LOCAL VOID FRACTION, FLOW RATE, PRESSURE, AND OTHER MEASUREMENTS.
SPECIALLY DESIGNED ATF SIMULATION HEATER RODS.
DESIGN AND assembly of STATIC MIXER, GRID SPACER, WIRE RIBS WITH TARGETED DESIGN FUNCTIONS, INCLUDING MAXIMUM MIXING FOR CHF PROMOTION, MINIMUM FIV (FLOW INDUCED VIBRATION), AND OPTIMAL GRID STRUCTURE TO MATCH DESIGNED PRESSURE DROP.
DESIGN AND assembly of SPECIAL FRETTINGLESS SPACER GRID TO FACILITATE OCEAN CONDITION OPERATION.
short heater rods with high non-uniform power peaking.
DIRECT HEATING WITH VERY THIN HEATER WALL TO ALLOW ACCURATE HEAT FLUX MEASUREMENT WITHOUT THE IMPACT OF AXIAL HEAT CONDUCTION UNDER VARIOUS TRANSIENT EVENTS.
WITH PROPRIETARY TECHNOLOGY TO DESIGN AND assembly of SPECIAL ANTI-NECK DOWN HEATER RODS TO FACILITATE LOW PRESSURE, LOW FLOW-RATE FLOW INSTABILITY AND CHF TESTING.
DESIGN AND assembly of SPECIAL HEATER RODS TOGETHER WITH PROPRIETARY SUPPORTING STRUCTURES FOR BOWED RODS, BALLOONED RODS, AND OTHER ABNORMALITY SIMULATION HEATER RODS.
DESIGN AND assembly of HIGH QUALITY RELIABLE WIRE-WRAPPED (WIRE-SPACED) SIMULATION FUEL PINS WITH PROPER INSTRUMENTATION AND STRESS RELEASE TO ENSURE THE INTEGRITY, SHAPE, AND POSITIONS OF SPACER RIBS DURING RAPID HIGH TEMPERATURE TRANSIENT TESTING.
DESIGN AND assembly of SPECIAL HEATER RODS TO PROVIDE VARIOUS NON-INTRUSIVE INSTRUMENTATION, INCLUDING POWER, LOCAL HEAT FLUX, HEATER WALL TEMPERATURE, FLUID TEMPERATURE, LOCAL VOID FRACTION, FLOW RATE, PRESSURE, AND OTHER MEASUREMENTS.
SPECIALLY DESIGNED ATF SIMULATION HEATER RODS.
DESIGN AND assembly of STATIC MIXER, GRID SPACER, WIRE RIBS WITH TARGETED DESIGN FUNCTIONS, INCLUDING MAXIMUM MIXING FOR CHF PROMOTION, MINIMUM FIV (FLOW INDUCED VIBRATION), AND OPTIMAL GRID STRUCTURE TO MATCH DESIGNED PRESSURE DROP.
DESIGN AND assembly of SPECIAL FRETTINGLESS SPACER GRID TO FACILITATE OCEAN CONDITION OPERATION.
short heater rods with high non-uniform power peaking.
|
|
ALL TRADEMARKS AND CONTENT ARE EITHER THE PROPERTY OF CARP ASSOCIATES USA, INC.,
ITS SUBSIDIARIES, DIVISIONS, AFFILIATED AND/OR RELATED COMPANIES.
COPYRIGHT © 2023 CARP ASSOCIATES USA, INC., ALL RIGHTS RESERVED.
ITS SUBSIDIARIES, DIVISIONS, AFFILIATED AND/OR RELATED COMPANIES.
COPYRIGHT © 2023 CARP ASSOCIATES USA, INC., ALL RIGHTS RESERVED.